 conthermtec WDA-heatersystem
Heaters
The core of the heating system is the conthermtec ECON 235 x ® heater with specially developed heat exchanger (register) with a heat output of at least 235 kW and a minimum oil consumption of about 16 lt / hr. The volume of air is far more than 23,000 m3 / h.
Control
The WDA will control the setpoints, operational, and the speed control of fans and heaters provided. The lockable control is user friendly and can be optimized to monitor the security freeze can be used.
Blow-in box
With the blow-in box the warm air in the room carried by two 50 cm from the heater exits with a volume of over 23,000 m3 / h. With additional sheets is exactly the airflow in the desired direction can be controlled.
Fans
The heat compression with the WDA Convectors (fans) is the upper ceiling area warmed air into the demand zones (residence area) transported where needed and the heat can be used.
Probe
With two WDA-sensor is the temperature in the upper and lower part of the hall is measured and the WDA to control given that calculates the required speed of the fans for optimal heat compression.
|
